Polyéthylène haute densité géomembrane utilisée dans une décharge (lisse)

Polyéthylène haute densité géomembrane utilisée dans une décharge (lisse)

Short Description:

Introduction: high density polyethylene(HDPE) smooth geomembrane ,made of virgin resin by special production ,has even and smooth surface on both sides.It is especially designed for flexible geomembrane. Specification: thickness ranges from 1.0mm to 3.0mm,width from 4m to 9m.The roll length can be made according to design or customer request. Property: HDPE smooth geomembrane has excellent chemical and mechanical property,anti-crack property,dimensional stablility and anti-aging property,furt...


Product Detail

Product Tags

Introduction:
high density polyethylene(HDPE) smooth geomembrane ,made of virgin resin by special production ,has even and smooth surface on both sides.It is especially designed for flexible geomembrane.
Specification:
thickness ranges from 1.0mm to 3.0mm,width from 4m to 9m.The roll length can be made according to design or customer request.
Property:
HDPE smooth geomembrane has excellent chemical and mechanical property,anti-crack property,dimensional stablility and anti-aging property,furthermore it can be exposed for anti-UV property.
Application:
municipal environmental,anti seepage in landscaping and municipal, metallurgy area, anti-corrosion, transportation infrastructure, agriculture reservoir waterproofing project, fisheries aquaculture. Other facilities waterproofing,anti erosion,anti seepage,reinforcement and seepage water collecting, preparation of temporary tank and special structre.
Product specification:

GB/T17643-2011(GH-2S)  CJ/T234-2006

No. Item Value
0.75 1.00 1.25 1.50 2.00 2.50 3.00
1 min density,(g/㎝3) 0.940
2 eld strength(TD,MD) N/㎜≥ 11 15 18 22 29 37 44
3 aking strength (TD,MD)N/㎜≥ 20 27 33 40 53 67 80
4 ld elongation(TD,MD),%≥ 12
5 eaking elongation (TD,MD)%≥ 700
6 rage tear strength(TD,MD),N≥ 93 125 156 187 249 311 374
7 puncture resistance,N≥ 240 320 400 480 640 800 960
8 stress crack resistance ,h≥ 300
9 arbon black content ,% 2.0~3.0
10 arbon black dispersion nine of 10 is grad I or II,less than 1 if grad III
11 OIT)oxidative induction time, min standard OIT≥100
high pressure OIT≥400
12 oven aging at80℃(standard OIT retained after 90 days), %≥ 55
  • Précédent:
  • Prochain:
  • Envoyez votre message à nous:

    ENQUÊTE MAINTENANT
    • * CAPTCHA: S'il vous plaît sélectionner l' camion

    Produits connexes

    ENQUÊTE MAINTENANT
    • * CAPTCHA: S'il vous plaît sélectionner l' clé

    ENQUÊTE MAINTENANT
    • * CAPTCHA: S'il vous plaît sélectionner l' Arbre